Cargo Lifting Nets | Lifting Slings | Single Use Lifting Bag | Lightweight Torpedo Recovery System

Multiple Leg Slings

Used in the carriage of suspended loads externally by helicopter, the sling can be attached to either the hook at the end of a Lifting Strop or the helicopter SACRU.   Multiple Leg Slings are available in the following configurations:

NSN 3940-99-977-3347 Sling, Medium-Duty, 4-Legged, 5470mm, HU30-0151200
NSN 3940-99-616-7474 Sling, Medium-Duty, 4-Legged, 4400mm, HU30-0151201
NSN 1670-99-676-4134 Sling, Medium-Duty, 3-Legged, 6470mm, HU30-0195210
NSN 3940-99-978-7626 Sling, Medium-Duty, 3-Legged, 5470mm, HU30-0195200
NSN 1670-99-126-4498 Sling, Medium-Duty, 2-Legged, 5470mm, HU30-0165310
NSN 1670-99-977-3346 Sling, Heavy-Duty, 4-Legged, 6550mm, HU30-0151300
NSN 1670-99-480-7568 Sling, Heavy-Duty, 3-Legged, 6550mm, HU30-0151310
NSN 3940-99-909-6096 Sling, Heavy-Duty, 2-Legged, 5650mm, HU30-0185100

Spreaders

The Spreader Bar is attached to a Sling, between two Sling Leg Chains, to protect the load by preventing any contact between the Sling Leg Chains and the Load.  A Spreader Bar is a compression strut.   It consists of an aluminum tube with an End Fitting and Drop Nose Pin attached to both ends.   The end fitting is designed to attach to the chain on a Sling Leg and the Drop Nose Pin secures the chain in position.    Two types of Spreader Bar, Medium Duty (MD) and  Heavy Duty (HD) are available in various sizes (from 1000mm to 3400mm) depending on the required use.